Product Description
The Double Mag Pouch is a convenient way to carry a two spare pistol magazines. It is available for a variety of pistol magazines as well as universal fit models. The center tension screw allows the user to adjust retention to their needs. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution.
Each pouch features Speed Chute. This flared opening allows easier insertion of magazines something that IDPA competitors will find very handy during a Loaded Chamber Reload (formerly known as Reload with Retention). For the non competitors its just easier to put mags in.
If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch.
Here are some of the adjustment for ride height that is available with this Double Mag Pouch. The shorter “Competition” pouch will loose some/all adjust heights. Don’t forget you we also offer optional inside the waistband (IWB) J-Hooks or soft loops for deeper concealment solutions.
When ordering you can specify right or left side carry with bullets forward or facing backward. The 9mm Universal pouch is designed to carry magazines facing forward or backward. It will fit many double stack 9mm, 40 S&W, and 357 Sig magazines from Glock, Smith & Wesson and Sig Sauer. It will not fit skinnier double stacks such as the CZ75 and Ruger SR9s.
The 45acp Universal pouch is also designed to carry magazines facing forward or backward. It will fit most double stack 45acp and 10mm magazines from Glock, Smith & Wesson, and FN.
There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish.
As always, if you have a question please Contact Us.
Additional information
| Belt Size | 1.5in, 1.5in Infinity Loop, 1.75in Standard, 1.75in Infinity Loop |
|---|---|
| RIght or Left | Lefty, Righty |
| Pistol Magazine | 1911, Beretta 92, CZ75, FN 45, Glock 17, Glock 20, Glock 42, Glock 43, HK USP 45, HK VP9, Ruger MKII, SA XD 45, SA XD 9/40, SA XDm 45, SA XDm 9/40, SA XDs 45, SA XDs 9/40, SIg P226, Sig P229, Sig P229 E-1, Sig P320, SW M&P 45, SW M&P 9/40, SW M&P Shield 45acp, SW M&P Shield 9/40, Universal 9/40, Walther PPQM2 9/40 |
Related Products
Competition Holster
Competition Holster for IDPA, USPSA, & 3Gun The Competition Holster is perfect for IDPA, USPSA, and 3Gun action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundredths of a second this is the holster you want on your side. Dual retention screws, most models, lets you fine tune the draw effort and feel. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting the most stringent IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also makes it compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights that do no extend past the slide width. If yours is different, let us know and we can typically accommodate your needs. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC shooter you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in its base position. Other custom belt attachment models are available such as the Safariland QLS & ELS. We can even custom mold a holster to your preferred belt attachment. Vistit the Belt Accessory Page or just contact us. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal for two tone competition holsters. Single layer holsters should choose flush. Two-tone dual layer competition holster can choose any option. The bevel is tapers the outer layer in most visible areas and adds a nice polished transition to the inner layer. This is our most popular option just beating out the Thin Blue Line (TBL) reveal. The Thin Blue Line reveal was originally made just for our Law Enforcement customers but we had such a demand we added it as a option for everyone, in every color nad kept the name. This is roughly an 1/8 inch set back on the outer layer letting more of the inner layer be visible. Bevel and TBL are not possible on single layer holsters, though the system will let you pay for it. We have added the option to choose your sweat shield coverage. Sometimes call a shirt guard, the sweat shield is the part of the holster between the rear of the slide and your body. Low cut is the shortest and typically ends just above the belt attachment point. The full is the tallest, covering most of the slide. Different slide profiles and grips will vary just how much is covered on the full option. If you are a high thumbs forward gripper any sweat shield will work. Low thumbs forward grippers tend to like the low shield coverage. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next competition. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. If you would like some other color scheme or a custom designed outer face then just Contact Us.$80.00
RS 1911 4.25″ Chopped Standard Holster
In stock and ready to ship! The 1911 Government Model Standard Holster chopped at 4.25″ Picture is just a representation of the style and is just one of several available. • 1911 4″ with Rail Gov’t model chopped, Fits most 4″, 4.25″ and 5″ models. • Right Hand • Black Kydex • 1.75″ injection molded belt loops$55.00
Single IWB Mag Pouch
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference. If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. As always, if you have a question please Contact Us.$30.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00
Bodyguard IWB Holster
The Bodyguard IWB Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. This Kydex holster is ambidextrous and can be configured for right and left hand carry. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The tuckable J-hook allows for full concealment with minimal hook showing. An optional pull-the-dot soft loop kit is available for $10. Also consider the new UltiClip. This is a great solution for those men and women who do not wear belts or want an even more concealed carry Kydex holster The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to holster. The extra stiffness over the .060 is something IDPA competitors will appreciate. The J-hook made of very strong .125 Kydex. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$60.00
