Product Description
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers.
The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs.
The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel.
The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate.
This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference.
As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.
Additional information
| RIght or Left | Lefty, Righty |
|---|
Related Products
Enhanced Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge.The Enhanced Trigger Guard features 1.75″ belt clip allowing easy concealed carry. The high impact polymer clip is removable and reverseable. The clip can be adjusted for a slight forward or reverse cant. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Micro Trigger Guard
The smallest and lightest protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you are looking for a compact trigger guard with an IWB belt clip check out the Enhanced Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the Micro Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Shoulder Holster Pistol
This is a pistol holster only for use with a shoulder harness system. This is a great add on for people who already have a shoulder holster rig but just need to add a different pistol. The Shoulder Holster Pistol comes with 1″ strap adapters common with most shoulder holster rigs found on the market including the Ares Tactical Shoulder Holste or the LIC (Low Intensity Conflct) Rig. As with all shoulder holster systems that use screws you must use thread locker e.g. Loctite or Vibratite once you have made your initial set up adjustments.$65.00
UltiClip Holster
The Ares Tactical UltiClip Holster takes our loved Bodyguard IWB Holster and updates it for the use with the UltiClip3 retention device. This clamp is so good you don’t need to wear a belt to secure your holster in place. We continue to use .080 thickness Kydex and Holstex for our holsters. That’s 33% thicker and much stronger that what a lot of other makers use. Yet, the Glock G19 holster with UltiClip only tips the scales at 3 ounces. Dual retention screws (most models) allows you to customize the effort need to draw the pistol from the IWB holster. The UltiClip can be moved to allow deep cover seating as well as very high on the belt line, though we don’t recommend placing it too high which increases the tendency to flop away from the body. It comes shipped to place the grip at your pants line. This allows you to establish a secure grip right away. The UltiClip Holster also allows you to customize the cant for your own personal needs. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. We have now added the option to order these with lights and lasers. Now you don’t have to contact us about a custom Kydex holster for the most popular weaponlights on the market like Surefire X300, XC1, and Streamlight TLR-1. Other models are available and as always you can send us your light if it is not listed As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$65.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
