QS Standard Holster Beretta M9a1 M9a3
$75.00
1 in stock
Category: Quick Ship
Tag: Beretta, Holster, M9a1, M9a3
Product Description
In stock and ready to ship! The Beretta M9a1 and M9a3 Standard Holster
Picture is just a representation of the style and not of the actual holster listed.
• Beretta M9a1 and M9a3
• Right Hand
• Black Kydex
• 1.75″ injection molded belt loops
Related Products
Sale!
RS 1911 XC1 weaponlight holster 001
In stock and ready to ship. This 1911 4.25″ in with Surefire XC1 Weaponlight Holster Several of the Blood Red eyelets have cosmetic damage. Features: • 1911 4.25″ Commander. Will fit 4 & 5″ models. Not for Sig 1911 models. • Surefire XC1 (does not fit other models) • Right Hand • OD Green Kydex • Blood Red Eyelets • 1.75″ Belt Loops$85.00 Original price was: $85.00.$75.00Current price is: $75.00.
Sold Out!
RS G17 Molle holster 001
Molle Holster for the Glock G17/G22/G31 full size pistols, but without tension screw adjustments. Features: • Glock G17 • Right Hand • Black Kydex • Molle Malice clips$55.00
QS Competition Holster XD9 001
In stock and ready to ship! The Springfield Armory XD 9/40 Competition Holster with Safariland ELS fork and plate. Picture is representative of the style and may not be the actual holster shipped. Features • SA XD9/40 4″ (Not XDs or XDm models) • Right Hand • Blue (police) Liner • Black Carbon Fiber wrap • Low Sweat Shield • Flush Edge$120.00
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Sold Out!
QS Standard Holster G19 USMC Iwo Jima
Our Standard Holster with custom USMC Iwo Jima face. Glock G19/G23 Right Hand 1.75″ belt loops$75.00 Original price was: $75.00.$65.00Current price is: $65.00.
Sold Out!
RS MP Shield Standard Holster
We have a few of these where the eyelets were overly compressed. Still works great; just cosmetic damage. The pictured holster is just one of several from that batch. As such, it is just representative of the lot. Standard Holster Right Hand Black 1.75″ injection molded closed belt loops$55.00 Original price was: $55.00.$30.00Current price is: $30.00.
Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB). Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$65.00