Product Description
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution.
Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference.
If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch.
When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right?
There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish.
As always, if you have a question please Contact Us.
Additional information
| IWB Attachment | Belt Clip 1.75, J Hook, Soft Loop |
|---|---|
| RIght or Left | Lefty, Righty |
| Pistol Magazine | 1911, Beretta 92, CZ75, FN 45, Glock 17, Glock 20, Glock 42, Glock 43, HK USP 45, HK VP9, SA XD 45, SA XD 9/40, SA XDm 45, SA XDm 9/40, SA XDs 45, SA XDs 9/40, SIg P226, Sig P229, Sig P229 E-1, Sig P320, Sig P365, SW M&P 45, SW M&P 9/40, SW M&P Shield 45acp, SW M&P Shield 9/40, Universal 9/40, Walther PPQM2 9/40 |
Related Products
Double Shell Holder
The Double Shell Holder is designed to get you quick access to two 12ga shot shells. The single centralized tension screw allows the user to fine tune the grip on your shells. This can give you the exact hold you need for vigorous combative activities or more casual field and range usage. The Double Shell Holder uses Blade Tech Tek-Lok bet attachment. This highly versatile mount allows you to properly size it for belts up to 2.25″ wide. This is a vast improvement in stability over other designs that do not have adjustments for different belt widths. The width of the TekLok also provides stability left and right over skinny clip type holders. The holder is designed to allow easy access to the shells weather you choose to hinged Tek Lok on the top or bottom. While having the hinge of the clamshell style Tek Lok is most common some prefer the have the hinge on the bottom so that the locking mechanism faces up. Some find this easier to put on and take off the belt. Using an optional Molle Clip or Molle-Lok will allow you to take the Double Shell Holder and mount it to your tactical vest, plate carrier, or battle belt. The body of the shot shell holder is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties in terms of durability and weight. The .060 thickness will do the job but feels flimsy to most people. The picture above shows standard 2 3/4″ shotgun shells in the holder. You could use shorter shells or the longer 3″ and 3 1/2″ length rounds. If you have any questions just reach out to us using the contact information at the bottom of the page.$30.00
PCC Mag Pouch
Tired of those big sticks not working well in your regular mag carrier? Is your PCC game suffering because your reloads are not as efficient as they could be? Ares Tactical’s PCC mag pouch is just what you have been looking for. This is a evolution of our well regarded Competition Mag Pouch. No longer will you have to worry if your magazines will stay in place on a stage with movement. No more 33 round mags be jacked up into your armpits. These are designed to fully encompass a full size magazine such as the Glock G17. When you use extended mags such as the MagPul Pmag21 and 33 round happy stick will allow easy grasping of the magazine. As of June 2017, we are only offering these for the Glock type magazines. Other magazine types will be added as demand dictates. Please feel free to contact us if you have a different magazine. UPDATE: August 2017, we have now added Beretta M9/Model 92 and UZI 9mm magazines to the available options. We will continue to add more as you all request for our PCC Magazine carriers. Two different mounting positions on your belt allow normal belt height or drop position allowing 1.5″ lower seating relative to the top of your belt. Three tension adjustment points go from gorilla grip to rattling bucket. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. Ares Tactical stock dozens of different colors, camo patterns, and textures such are carbon fiber. When ordering a single layer carrier use the Base color option. If you want a dual layer Kydex pouch the base will be inside and wrap will be the outer color. Fatback is not available in the PCC Mag Pouch. Though, the current system will let you order it. Don’t forget to order your matching Competition Pistol Holster here. You might as well look good while you are winning. Enjoy the best for your Pistol Caliber Carbine whether your compete in USPSA, IDPA, 2 gun, 3 gun, or outlaw matches. You can always check out lead time on the FAQ Tab.$45.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Single Magazine Pouch
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each pouch features Speed Chute. This flared opening allows easier insertion of magazines something that IDPA competitors will find very handy during a Loaded Chamber Reload (formerly known as Reload with Retention). For the non competitors its just easier to put mags in. If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch. Here are some of the adjustment for ride height that is available with this Double Mag Pouch. The shorter “Competition” pouch will loose some/all adjust heights. Don’t forget you we also offer optional inside the waistband (IWB) J-Hooks or soft loops for deeper concealment solutions. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. As always, if you have a question please Contact Us.$30.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00
Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB). Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$65.00