Product Description
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB).
Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.
Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt.
As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.
Additional information
| RIght or Left | Lefty, Righty |
|---|---|
| Belt Size | 1.5in, 1.5in Infinity Loop, 1.75in Standard, 1.75in Infinity Loop |
| Sweat Shield | Low w. RMR/MRD, Low, Mid, Full |
Related Products
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Belt Drop Holster
The Belt Drop Holster is the happy place(ment) between having a belt holster and thigh holster. The mid drop design fits belts up to 2.25″ with an adjustable belt sizer. Holsters come shipped in the neutral vertical position but can be easily adjusted for forward or back cant angle with a standard Philips screwdriver. Retention can adjusted via the 2-3 tension screws. Additional levels of security can be had with the Thumb Break option. This rubberized laminated webbing secures across the rear of the slide and is easy to manipulate under stress. This strap is also removable. The single thigh strap helps stabilize the dropped holster. The leg strap features rubber anti-slip strips to minimize shifting while active. There is also an elastic webbing for additional comfort. This strap is also removable. All holsters come mounted directly to the belt drop platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous. There is some adjustment in the holster placement in the Belt Drop dependent if you have a light selected. This can be 3/4″ to 1.5″ Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge.$99.00
QS Competition Holster P320 two tone
In stock and ready to ship! The Sig Sauer P320 Compact Competition Holster. Can be cut down to low or mid sweat shield. Just put it in the notes section. Picture is representative of the style and may not be the actual holster shipped. Features • Sig P320 Compact • Right Hand • Zombie Green Liner (aka Neon or Kawasaki green) • Black Carbon Fiber wrap • Full Sweat Shield • Beveled Edge$100.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Bodyguard IWB V2
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers. The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs. The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.$55.00